Logo

Edgebanders

NikMann KZM6 TM4 Series

are heavy duty, single sided automatic edgebanding machines 100% made in Europe.

All edge banders from FORZA Machinery are equiped with teflon glue tank with electronic regulation of the glue temperature and automatic lowering the temperature of the glue at recess.

The edgebanders are equiped with heavy duty guillotine for preliminary cutting of thick PVC /ABS edges. Edgebander with 3 big positive pressure rollers. The end trim unit on FORZA Machinery edgebanding machines have two HF motors – 12000rpm. Top and bottom trimmers with vertical and horizontal adjustment with two HF motors 12000 rpm. Every edgebander comes with round scrapers too.

Transport system with chain. Pressing rollers with bearings. Supporting beam with rollers - immobile. Control panel at the front side of the machine.

 


Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series Edge bander NikMann KZM6-TM4 Series
Buffing Scrapping Trimming End Trimming Pressing Edge Cutting Gluing


NikMann KZM6-TM4 Series
NikMann KZM6-TM4 edgebander NikMann KZM6-TM4 edgebander
NikMann KZM6-TM4 edgebander NikMann KZM6-TM4 edgebander
NikMann KZM6-TM4 edgebander NikMann KZM6-TM4 edgebander
NikMann KZM6-TM4 edgebander NikMann KZM6-TM4 edgebander
NikMann KZM6-TM4 edgebander NikMann KZM6-TM4 edgebander

GLUE POT & PRESSURE ROLLERS

Automatic feeding of coiled edge strip with strong pneumatic guillotine to shear up to 3mm thick x 65mm wide edging. Efficient glue pot with recirculating glue flow. Three pressing rollers backed by pneumatic pressure to guarantee a strong bond.


END TRIM SAWS STATION

Two independent 1200rpm HF Italian saw motors slide on precision THK guides, trimming the leading and tailing ends respectively.


TOP & BOTTOM TRIM STATION

Two 12,000 rpm HF Italian motors with radius shaped cutterheads to remove the overhanding edgestrip plus fine trim. Heavy cast iron construction of this unit provides the high quality finish.


TOP & BOTTOM RADIUS SCRAPER STATION

Heavy, rigid cast iron construction supports top & bottom radius scrapers which impart a perfect finish on the edge radius of PVC or ABS edging.


FEED TRACK

The strong feed chain drives rubber covered pads, sliding on one flat support and one round guide for precise, straight panel feeding.


SAFETY FEATURES

CE certification Highest European safety standard YES
Opening doors at the rear of the machine YES
Safety covers and protection with electrical interlock YES
Dust extraction outlets on the outside of the machine covers YES
Pad lockable main switch> YES
Overload motor protection YES
Emergency stop button on the control panel YES
Emergency switch on the opening doors of the machine YES